Diesel Products

 

 

 

                    



ASTM D-613 . . . . . . . . . Increases cetane by 5 to 7 numbers
ASTM D-2274 . . Limits insoluble residue to less than 5 ppm
EMD Stability Test . . . . . . . . .  Gives less than '2' pad rating
ASTM D-665-60-A . . . . .Eliminates all corrosion / R-1 rating
NACE TM 01-72-86 . . . . .  Eliminates all corrosion / A rating
ASTM D-5001 . . . . . Reduces fuel friction wear / scars >20%
ASTM D-1094 (water test) . . . . . . . .1-A rating and clear fuel

 

AmFleet® MEGATANE®

INCREASES CETANE 10%-15%

INCREASES COMBUSTION and POWER

REDUCES or ELIMINATES VISIBLE POLLUTION

PROMOTES MUCH EASIER STARTING

ELIMINATES SLUDGE & PARTICULATE

CLEANS INJECTORS and VALVES

DRAMATICALLY REDUCES POLLUTION

STABILIZES FUEL, for up to 2 years

ELIMINATES WATER FROM FUEL

CORROSION PROTECTION to pipeline standards

WORKS With FILTERS

Contains Special LUBRICANTS for LOW SULFUR and new REFORMULATED DIESEL FUELS

1 U.S. Pint Treats 125 Gallons
Available in Pints, Gallons, 5's and 55's

 

 

 


ASTM D-2274 . . . Limits insoluble residue to less than 5 ppm
EMD Stability Test . . . . . . . . . .  Gives less than '2' pad rating
ASTM D-665-60-A . . . . . . Eliminates all corrosion / R-1 rating
NACE TM 01-72-86 . . . . . .  Eliminates all corrosion / A rating
ASTM D-5001 . . . . . .  Reduces fuel friction wear / scars >20%
ASTM D-1094 (water test) . . . . . . . .  1-A rating and clear fuel

 

 

AmFleet® DIESEL
                       CLEAN®

REDUCES MAINTENANCE due to poor quality fuel

STOPS FUEL STORAGE PROBLEMS

ELIMINATES SLUDGE & PARTICULATE

CLEANS INJECTORS and VALVES

STABILIZES FUEL & STOPS OXIDATION

STOPS VARNISH and GUM FORMATION

ELIMINATES WATER from fuel system

Contains Special LUBRICANTS for LOW SULFUR and new REFORMULATED DIESEL FUELS

1 U.S. Pint Treats 400 Gallons
Available in Pints, Gallons, 5's and 55's

 

 

 

 

 

 

ASTM D-613 . . . . . . . . . . . . Increases cetane by 2 to 4 numbers
ASTM D-97 . . . . Lowers operating temperature by 40 degrees F
ASTM D-2274 . . . . .  Limits insoluble residue to less than 5 ppm
EMD Stability Test . . . . . . . . . . . . . Gives less than '2' pad rating
ASTM D-665-60-A . . . . . . . .  Eliminates all corrosion / R-1 rating
NACE TM 01-72-86 . . . . . . . . . Eliminates all corrosion / A rating
ASTM D-5001 . . . . . .  . . Reduces fuel friction wear/ scars >23%
ASTM D-1094 (water test) . . . . . . . . . . . 1-A rating and clear fuel

 

AmFleet®  ARCTIC PLUS®

ASSURES COLD TEMPERATURE OPERATIONS by PREVENTING WAX FORMATION to -40° F (-40° C) with most fuels

IMPROVES COLD TEMPERATURE STARTING

INCREASES CETANE, COMBUSTION & POWER

CLEANS INJECTOR and VALVES

REDUCES or ELIMINATES SMOKE & POLLUTION

STABILIZES FUEL for long term storage

STOPS CORROSION and RUST

ELIMINATES WATER from fuel

STOPS VARNISH & GUM FORMATION in fuel

Contains Special LUBRICANTS for LOW SULFUR and the NEW REFORMULATED DIESEL FUELS

Note: Because Arctic Plus is an extremely concentrated chemical, containing over 40% polymer chemistry and over 93% active chemical, the chemical must be above 35° F before adding to the fuel. The fuel may be of a lower temperature and the chemical can be warmed from a lower temperature before adding; with no loss in efficacy or performance.

1 U.S. Pint Treats 125 Gallons
Available in Pints, Gallons, 5's and 55's

 

 

 


Refinery Research Home